| Prosiect | Cynnwys | Gallu |
| 1 | dosbarthiad bwrdd | Sylfaen Alwminiwm, Sylfaen Copr, copr sylfaen cerameg, Bwrdd Bade Cyfun |
| 2 | deunydd | Alwminiwm Domestig. Copr domestig, Alwminiwm wedi'i fewnforio, copr wedi'i fewnforio |
| 3 | triniaeth arwyneb | HASL/ENIG/OSP/sicering |
| 4 | cyfrif haen | bwrdd pnnted un ochr / bwrdd printiedig dwy ochr |
| 5 | maxi.Bwrdd Maint | 1200mm*480m(n |
| 6 | min.Maint Bwrdd | 5mm*5mm |
| 7 | lled llinell/mynediad | 0.1mnV0.1mm |
| 8 | ystof a thro | <=0.5% (tfiickness: 1 .Omm, Maint Bwrdd: 300mm * 300mm) |
| 9 | trwch bwrdd | 0.5mm-5.0mm |
| 10 | trwch ffoil copr | 35urrV70um/105um/140um/175unV210um/245um/280um/315um/35Qjm |
| 11 | goddefgarwch | Llwybro CNC: ±0.1 mm; dyrnu: 士 0.1 mm |
| 12 | V-CUT cofrestru | ± 0.1mm |
| 13 | Trwch copr wal twll | 20um-35um |
| 14 | Mm cofrestru lleoliad twll (campare gyda data CAD) | ± 3mil (10.076mm) |
| 15 | Min.dyrnu twll | 1.0mm (Trwch bwrdd bebw1.0mmr1.0mm) |
| 16 | Min.punching slot sgwâr | (Trwch bwrdd o dan 1 .Omm, 1.0mm * 1 .Omm) |
| 17 | Cofrestru cylched printiedig | ± 0.076mm |
| 18 | Min.drill diamedr twll | 0.6mm |
| 19 | trwch y driniaeth arwyneb | aur platio: Ni 4um-6um>Au0.1um-0.5umENIG:Ni 5um-6um,Au:0.0254um-0.127umarian: Ag3um-8umHASL: 40um-1 OOum |
| 20 | Goddefgarwch gradd V-CUT | (Gradd) |
| 21 | Trwch bwrdd V-CUT | 0.6mm-4.0mm |
| 22 | Min.legend lled | 0.15mm |
| 23 | Mwgwd Min.Soldor yn agor | 0.35mm |